UTImeter Otex
  • Add to My Bookmarks
    • SHARE 
Terminal Operations

Honeywell Tanksystem’s HERMetic UTImeter Otex is a portable electronic liquid level gauge designed to operate under open conditions on petroleum storage tanks where open gauging is permitted. The unit is used for custody transfer and temperature verification, inventory control measurement and oil/water interface level detection on storage tanks.

  • Email Us
  • Call Us
  • Request a Call

    • HERMetic UTImeter Otex enables three, optionally four, measurements in a single operation:

    • Ullage level

    • Temperature verification

    • Oil-water interface level

    • Innage/reference height (Visc Version, Innage level = Reference height minus Ullage level)

     

    Four different versions are available:

    • HERMetic UTImeter Otex – comes with 1" sensing probe and FKM gaskets for main hydrocarbon applications (standard version)

    • HERMetic UTImeter Otex Visc – comes with 2" load on the sensing probe and is recommended for highly viscous products. The additional load permits a manual detection of the dip/ datum plate for reference height measurement and consequently, innage calculation.

    • HERMetic UTImeter Otex with French plate – comes with special base plate for fixation of the unit on still pipes with up to 6-iInch inner diameter.

    • HERMetic UTImeter Otex with pipe clamp – enables fixation on pipe wall or big hatch wall. 

    The sensor of HERMetic UTImeter Otex is calibrated once at the factory and does not require subsequent calibration. The temperature probe is an RTD element. The characteristics of the RTD are stored inside the sensor. The sensor sends true temperature values to the electronic box. Therefore, changing a sensor or a tape does not require a new calibration.

    The unit is resistant to corrosive liquids with appropriate gaskets and O-rings and does not experience temperature drift or degradation of sensitivity due to the sensor’s aging. The HERMetic UTImeter Otex is set on the open gauging hatch and the base plate represents the zero ullage base.

    HERMetic UTImeter Otex complies with:

    • ISO, API, IP

    • EC Directive 89/336/EEC

    • EC Directive 94/9/EC

    Available approvals and certificates include IECEx / ATEX / FM Approvals / NEPSI / GOST-R.  

    ​HERMetic UTImeter Otex ensures accurate manual level gauging, temperature and ullage level measurement and oil/water interface detection. It permits verification and calibration of fixed level gauging systems. In addition, its modular design lowers maintenance costs for users. The instrument offers high accuracy and stability as well as high repeatability of measurements for level and temperature in a single operation.
    Documentation
    8 Documents FoundItems per page :
    TitleUse SHIFT+ENTER to open the menu (new window).
    DescriptionUse SHIFT+ENTER to open the menu (new window).
    File SizeUse SHIFT+ENTER to open the menu (new window).
    TypeUse SHIFT+ENTER to open the menu (new window).
    Release DateUse SHIFT+ENTER to open the menu (new window).
    Hermetic UTImeter Otex Product Leaflet Product presentation Hermetic UTImeter Otex, portable level gauge for use under open conditions.383.69 KBBrochure30 Nov 2012
    Hermetic UTImeter Otex product sheet in FrenchProduct presentation for Hermetic UTImeter Otex in French language.356.15 KBBrochure29 Nov 2012
    Hermetic UTImeter Otex Product Sheet in GermanProduct collateral for Hermetic UTImeter Otex in German Portable electronic level gauging unit for use under open conditions.373.67 KBBrochure29 Nov 2012
    Portable electronic level gauge UTImeter Otex for open operationHERMetic UTImeter Otex Datasheet in German language373.67 KBBrochure19 Nov 2012
    Portable electronic level gauge UTImeter Otex for open operationHERMetic UTImeter Otex Datasheet in English language383.69 KBBrochure19 Nov 2012
    Portable electronic level gauge UTImeter Otex for open operationHERMetic UTImeter Otex Datasheet in French language356.15 KBBrochure19 Nov 2012
    Product Catalogue for Land Based Applications Complete product portfolio of Honeywell Tanksystem portable level gauging and sampling solutions for land based applications2.14 MBProduct Information Note30 May 2012
    UTImeter Otex Portable Open Electronic Level Gauge The UTimeter Otex is a portable electronic level gauge for use under open operation437.76 KBProduct Information Note30 May 2012
    Maintenance and support are critical aspects to consider when choosing a technology partner. Honeywell Tanksystem provides all its equipment with a comprehensive and detailed operation & service manual which allows the user to perform repairs or parts exchange without sending back the unit to factory. Please contact tanksystem@honeywell.com if you miss the operation manual of your particular model. If required an official service station network is available to assist you for maintenance or calibration purpose. Check the Service Station list in the operation manual to find the closest service station.
     
    Get Microsoft SilverlightHERMetic UTImeter Otex
     
     
     
    Want to learn more about UTImeter Otex?
    Products and Services
    Support
    Training
    Resources
    My Account

    Finding the information you need is important to us.

    Did you find what you were looking for today?

      Yes      No

    How likely are you to recommend HoneywellProcess.com to a colleague?

    • 0
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10

    Not at all likely

    Extremely likely

    How can we serve you better?

    Your email:

    Your email address will help us get in touch with you to resolve your query/ concern.